PCD saw blade
PCD (polycrystalline diamond) material is made of Carbide saw
blade,it is mainly used for metal processing, PCD Carbide saw blade
with high hardness and long service life characteristics, so PCD
saw blade’s service life is 30-50 times more than alloy saw blades.
1. PCD Carbide saw blade tipped with high strength, not easy
to collapse teeth, good sharpness
2. PCD blade’s Sawing end face does not collapse edge, not
become black, straight edge angle is good, can improve
the appearance of the product quality.
3. PCD Carbide saw blade with long service life,
can reduce production costs and repair costs,
improve production efficiency and work safety,
reduce labor intensity..
1. Wood Flooring, Particle Board, MDF, Panel Furniture, Cabinet,
Firewood, Plywood, Melamine Plywood
2. Anti-era special boards, electronic circuit boards, Bakelite,
fibreboard, acrylic board, plexiglass, rigid plastic
3. Aluminum, copper rod, engine cylinder: dedicated PCD saw blade
PCD Saw blade precautions:
1. Please be sure to hang the saw blade vertically on a dry shelf.
Be sure to avoid damp places. Do not lay the alloy saw blade flat
on the floor or shelf. Placing will cause the alloy saw blade to
2. When used, do not exceed the maximum speed specified. Speed
calculation attached, for reference.
3. Use, must be with a protective cover, gloves, helmets, safety
shoes, safety glasses.
4. In the installation of alloy saw blade, you must first confirm
the performance of saws, use, it is best to read the saw's manual.
To avoid loading the wrong, causing an accident.
5. In the installation of alloy saw blade, you must first check
whether the alloy saw blade crack, distortion, fill level, off the
tooth and so on, and then install.
6. Saw teeth alloy hard alloy sharp, no collision, drop the ground,
you must gently.
7. Bahrain alloy saw blade, you must confirm the center hole of the
saw blade is securely fixed to the flange of the saw table, the
gasket must be set when the gasket; and then, gently push the saw
blade by hand to confirm the rotation Whether eccentric shaking.
8. The cutting direction indicated by the arrow of the saw blade
must be aligned with the rotation direction of the table. Prohibit
the installation of the opposite direction, the wrong direction
will result in missing gear.
9. Pre-transfer time: replacement alloy saw blade, the use of one
minute before the pre-turn, let the saw station into working
condition, can cut.